Synthetic 10W-30/SAE 30
Heavy Duty Diesel Oil
(ACD)
Exceeds both 10W-30 multi-grade and SAE 30 straight-grade viscosity
requirements. Provides outstanding performance in older and modern
diesel engines as well as gasoline engines. Excellent for heavy
equipment and personal vehicles.
Package sizes include:
1-Gallon Bottle
1-Gallon Bottles (case of 4)
30-Gallon Drums
55-Gallon Drums
PRODUCT DESCRIPTION
AMSOIL Synthetic 10W-30/SAE 30 Diesel Oil (ACD) is formulated with
premium synthetic base oils that exceed both 10W-30 multi-grade and SAE
30 straight-grade viscosity requirements for outstanding performance in
modern and older diesel engines. Unlike conventional SAE 30 motor oils,
AMSOIL ACD has a naturally high viscosity index and does not contain
paraffin (wax). It has a -36°F pour point and qualifies for SAE 10W,
making it an “all season” multi-grade lubricant with a wide operating
temperature range. AMSOIL ACD is formulated without viscosity index
improvers (VI). This shear stable formulation stops viscosity loss and
associated bearing and cylinder bore wear. AMSOIL ACD contains premium
additives with a high 12 TBN to neutralize acids from blow-by, exhaust
gas recirculation (EGR) and high sulfur diesel fuels. It protects
against damaging piston deposits, ring sticking and sludge.
AMSOIL, the leader in automotive synthetic lubrication,
produced the world’s first API qualified synthetic motor oil back in
1972. Trust the extensive experience of AMSOIL The First in
Synthetics® to do the best job protecting your equipment.
APPLICATIONS
Where these viscosity grades are specified, AMSOIL Synthetic 10W-30/SAE
30 Diesel Oil (ACD) provides outstanding performance as a straight-grade
SAE 30 for older two- and four-stroke diesels and as a multi-grade SAE
10W-30 in modern four-stroke diesels as well as gasoline engines. AMSOIL
ACD is ideal for use in a wide variety of light and heavy-duty
applications, including agriculture, off-road construction, trucking,
mining, industrial (pumps and generators) and personal automotive or
commercial transportation. It is recommended for use with low or high
sulfur diesel fuels in standard, turbocharged or supercharged engines,
all off-road engines and pre-2007 on-road engines.
• SAE 10W-30 performance
without VI improvers
• Cost-effective replacement for conventional oils
• Excellent shear stability
• Outstanding wear protection
• Superior protection over a broad range of operating temperatures
• Extended service life with oil analysis
PERFORMANCE
AMSOIL ACD is recommended for diesel engines and other
applications requiring any of the listed worldwide specifications and
gasoline engines requiring API SL, SJ, SH... or ACEA A3.
• API CI-4+/CH-4/CG-4/SL
• API CF/CE/CD/CC
• API CF-2/CD-II
• Global DHD-1
• ACEA A3/B3, E2, E3, E5
• JASO DH-1
• Mack EO-N Premium Plus ’03
• Detroit Diesel Power Guard 93K214
• Caterpillar ECF-1-a, ECF-2
• Cummins CES 20076/20077/20078 (current), 20071/20072 (older)
• Volvo VDS3/VDS2
• Mercedes Benz 228.1/228.3/229.1
• MAN 3275
• MTU Type 1
• MIL-PRF-2104G
MIXING AMSOIL
AMSOIL ACD is compatible with conventional and synthetic motor oils,
however, mixing AMSOIL ACD with other oils will shorten the oil life
expectancy and reduce the performance benefits. AMSOIL does not support
extended drain intervals where AMSOIL ACD has been mixed with another
product.
Aftermarket additives are not recommended for use with
AMSOIL ACD.
SERVICE LIFE
AMSOIL Synthetic Heavy Duty Diesel Oil is recommended for extended drain
intervals in unmodified(1), mechanically sound(2) vehicles or equipment
as follows:
Personal Light Truck Diesel Engine Service
• Normal Service(3) — Up to 25,000 miles or one
year, whichever comes first, or longer based on oil analysis.
• Severe Service(4) — Up to 15,000 miles or one
year, whichever comes first, or longer based on oil analysis.
• Replace AMSOIL Ea™ full flow oil filter at the
time of oil change up to 25,000 miles (other brands at standard
OEM* intervals).
Commercial or Fleet Vehicles, Long-Haul Trucks,
Marine Craft, RV, Off-Road Equipment
• Non-EGR equipped diesels
— extend drain intervals up to two times (2X) the OEM* recommended
drain interval or one year, whichever comes first, or longer based
on oil analysis.
• EGR equipped or low emission diesels
— extend drain intervals based on oil analysis or use the OEM*
recommended interval.
• Replace Donaldson Endurance™ or AMSOIL Ea™
full flow oil filters at the time of oil change up to two times
(2X) longer than the OEM* standard interval, not to exceed
60,000 miles in long-haul trucks.
Gasoline Engine Service
• In gasoline engines, oil drain intervals may be
extended up to two times (2X) the OEM* recommended drain interval
(not to exceed 15,000 miles without oil analysis) or one year,
whichever comes first. Replace AMSOIL Ea™ full flow filter at the
time of oil change up to 25,000 miles. Replace other brand oil
filters at standard OEM* intervals.
*OEM = Original Equipment Manufacturer
(1) Where the engine or operating
conditions have been modified from the original manufacturers' design,
no oil change interval recommendation is made. Oil change intervals are
at the owner's discretion. Examples include the use of performance
computer chips; modified exhaust, fuel or air induction systems and the
use of fuels other than those recommended for normal operation by the
manufacturers.
(2) Engines are in good working condition
and within the factory design settings. Mechanically sound engines, for
example, do not leak oil or consume excessive amounts, are not worn out,
do not overheat, do not have internal or external anti-freeze leaks and
have a properly working emission control system. AMSOIL recommends
repairs be made to malfunctioning engines prior to the installation of
AMSOIL synthetic oils.
(3) Personal transportation vehicles
frequently traveling greater than 10 miles (16 km) at a time and not
operating under severe service.
(4) Extensive engine idling, daily short
trip driving less than 10 miles (16 km), frequent towing, plowing or
hauling heavy loads and frequent driving in dusty conditions. AMSOIL Ea™
and Donaldson Endurance™ full flow oil filters are designed for extended
drain intervals. They stop smaller particles, have less restriction and
last longer than regular filters. For best performance, use AMSOIL Ea or
Donaldson Endurance oil filters.
AMSOIL Ea™ and Donaldson
Endurance™ full flow oil filters are designed for extended drain
intervals. They stop smaller particles, have less restriction and last
longer than regular filters. For best performance, use AMSOIL Ea or
Donaldson Endurance oil filters.
AMSOIL
Ea By-pass
oil filters are specialized for the removal of small, wear-causing dirt
particles, thereby extending engine life. AMSOIL encourages using an
AMSOIL Ea By-pass filter system for maximum engine and oil life.
Oil Analyzers Inc. (715-395-0222) is a division of AMSOIL that
provides cost-effective, quality oil analysis services.
Health & Safety
This product is not expected to cause health concerns when used for the
intended application and according to the recommendations in the
Material Safety Data Sheet (MSDS). An MSDS is available upon request at
715-392-7101 or simply click here for a PDF
version. Keep Out of Reach of Children. Don’t pollute. Return
used oil to collection centers.
TYPICAL TECHNICAL PROPERTIES
Synthetic 10W-30/SAE 30 Diesel Oil
(ACD) - Revised as of 8/07 |
| Kinematic Viscosity @ 100°C, cSt (ASTM D-445) |
10.5
|
| Kinematic Viscosity @ 40°C, cSt (ASTM D-445) |
66.3
|
| Viscosity Index (ASTM D-2270) |
141
|
| Cold Crank Simulator Apparent Viscosity @
-25°C, cP (ASTM D-5293) |
5917
|
| Pour Point °C (°F) (ASTM D-97) |
-36 (-33)
|
| Flash Point °C (°F) (ASTM D-92) |
230 (446)
|
| Fire Point °C (°F) (ASTM D-92) |
248 (478)
|
| Noack Volatility, % weight loss (g/100g)
(ASTM D-5800) |
6.7
|
| Four Ball Wear Test (ASTM D-4172B @ 40 kg
pressure, 75°C, 1200 rpm, 1 hr), Scar, mm |
0.40
|
| Total Base Number |
12.0
|
|
AMSOIL
is the undisputed leader in synthetics.............
Since 1972,
AMSOIL Synthetics have
proven to be the BEST.
AMSOIL also engineers and manufactures Ea Oil Filters
with Nanofiber Technology which have a 25,000 mile/1-year
service life as well as specialized filtration systems for
commercial and fleet applications in cars and light, medium and
heavy trucks which can filter particles down to less than one
micron (a standard full flow oil filter can only filter to 20-25
microns, and at a reduced efficiency) making oil changes
virtually unnecessary and virtually eliminating engine wear.
These filters have been proven by millions of miles of over-the
road trucks, construction equipment and fleet service.
-
AMSOIL saves you time and money.
-
The only 25,000 mile/one- year and
35,000/one- year motor oil in the world.
-
Exceeds the most stringent
performance specifications of all major U.S. and foreign
automotive and truck manufacturers.
-
Provides up to two-times the wear
protection of other motor oils.
-
Increases the life of your vehicle.
-
Improves performance, fuel economy
and efficiency.
-
Diesel oil and filtration products
designed to deliver 1,000,000 miles for over-the-road trucks
before engine overhaul.
-
Used by many national racing teams,
fleets, police departments, construction firms and trucking
companies.
To Sell AMSOIL in Your Store or
Purchase For Use in Your Businesses Equipment
Factory Direct Catalog Request
Form |
Superior Oils and Lubricants
ken@oilsandlube.com
Phone 918-269-0081
Toll Free 1-877-237-6323
8555 E. Wesson Ct., Claremore, OK. 74019
AMSOIL Synthetic Motor Oils
Home Page
Dodge Cummins Diesel
| Ford Powerstroke Diesel
|
AMSOIL vs. Mobil 1
Converting
to AMSOIL | Motorcycle Oils |
Diesel Fuel Additives
Gasoline
Additives | AGGRAND
| ALTRUM
Harley
Davidson
| Links |
Site Map
