|
Free Factory Direct Catalog, Product, Technical and Wholesale Pricing Packet
Request Form
Purchase AMSOIL
Home
DEALERSHIP
INFORMATION
HOME BUSINESS OPPORTUNITIES
FAVORITE LINKS
Request Retail-on-the-Shelf or Commercial Account Information.
Product Application Guide
Amsoil Filter Guide
|
EaBP By-pass Filters
AMSOIL EaBP Filters are high efficiency by-pass filters
that also remove soot.
Three EaBP Filter Sizes Include:
EaBP90
EaBP100
EaBP110
In an effort to continually enhance the AMSOIL product
line, new technologies are evaluated to provide the best products for
AMSOIL Dealers and customers. Consequently, AMSOIL is now offering new
by-pass filters from its revolutionary Ea line of filtration products.
AMSOIL EaBP Filters are high efficiency by-pass filters that also remove
soot. AMSOIL EaBP Filters are superior to AMSOIL BE
by-pass Filters in several key areas.
Higher Efficiency
AMSOIL EaBP Filters have an efficiency of 98.7 percent at two microns,
compared to the AMSOIL BE Filters’ 98.6 percent efficiency at three
microns. At normal operating RPMs the EaBP Filter will filter all of the
oil in a typical five quart sump in less than 10 minutes.
Superior Construction
The superior construction of AMSOIL EaBP Filters provides better sealing
and increased longevity along with superior corrosion resistance. AMSOIL
EaBP Filters have a marine powder coated exterior. Their zinc-dichromate
base plates increase rust protection, and they feature the same
dimensions and threads as BE-90, BE-100 and BE-110, so they are
compatible with existing AMSOIL by-pass filter mounts. EaBP Filters have
a nitrile HNBR gasket and an orange silicone anti-drain valve. The two
stage pleated and layered cellulose/full synthetic media has an
efficiency rating of 98.7 percent at two microns.
Longer Lasting
When used in conjunction with AMSOIL motor oil and an AMSOIL EaO or
Donaldson Endurance™ filter, the EaBP should be changed every other
full-flow filter change up to 60,000 miles. When used with other brands
of motor oil or full-flow filters, the EaBP filter should be changed
every other full-flow filter change. AMSOIL recommends using oil
analysis when extending oil drain intervals.
Increased Oil Capacity
The increased fluid system capacity and filtration life provides
improved oil cooling and ensures that equipment constantly runs on clean
oil. Engine efficiency is increased and engine life is extended
significantly.
Soot Removal
AMSOIL has designed a new high-efficiency by-pass filter element that is
also a soot removal device. AMSOIL Ea by-pass Filters use a
synthetic/cellulose sandwiched media. The inner layer of the element is
composed of a highly efficient cellulose media covered with a full
synthetic media outer layer. These filters remove 39 percent of soot
contaminants less than one micron. Soot removal efficiency increases
approximately 10 to 14 percent when the EaBP Filter is used in
conjunction with a standard full-flow filter, even higher in conjunction
with Ea Oil Filters or Donaldson Endurance filters.
The Dangers of Soot
The combustion process of diesel engines creates soot. After fuel is
injected, combustion occurs with elevated soot levels as a byproduct of
the process, and the combustion particulates become trapped on the
exposed oil film. The rings wipe the particulates into the oil and the
fine particulates aggregate, increasing levels of soot in the oil.
Oil with dispersant additives will generally keep
sootin the range of 0.002 to 0.5 microns in suspension; detergent
additives prevent the build-up of sludge and act as an acid neutralizer,
keeping soot in the range of 0.5 to 1.5 microns in suspension. These
anti-wear additives work by providing a sacrificial chemical-to-chemical
barrier. As the amount of soot suspended in the oil increases, the
performance of these additives decreases.
 Soot
Causes Wear
As an oil’s soot dispersant additive level increases, wear reducing
additives become less effective. This creates a direct linear
correlation between wear and soot concentration; the higher the
concentration of soot, the higher the level of wear. Today’s oil
manufacturers are extending oil life by holding higher concentrations of
contaminants, including soot, in suspension in the oil. They are also
increasing fuel economy by reducing oil viscosity and oil film
thickness. Therefore, even smaller sized contaminents are becoming
critical in items in terms of creating wear. This further necessitates
the use of by-pass filtration, especially in diesel engines.
 EaBP
Vital Statistics
AMSOIL will continue to offer three by-pass filters: the EaBP90, EaBP100
and EaBP110. All vehicles and applications that can accept the AMSOIL
BMK11, 12, 13, 15, 16, 17 and 18 filter mounts can use the EaBP Filters.
Per AMSOIL by-pass installation instructions, AMSOIL recommends by-pass
filters be mounted as close to vertical as possible. The filters are
equipped with an anti-drain back valve in the event they are mounted at
an angle.
Who Uses by-pass Filtration?
by-pass filtration comes standard on all heavy-duty turbo diesel engine
applications from OEMs such as Cummins, Mack and many more. It has been
available as standard equipment or as an option from OEMs like
Caterpillar, John Deere, Case and others, but it isn’t just for
heavy-duty diesel operators. by-pass filtration is a valuable commodity
for anyone that wants to extend drain intervals and prolong engine life.
It is also beneficial to vehicles that are exposed to high levels of
contaminants on a regular basis.
|
AMSOIL
is the undisputed leader in synthetics.............
Since 1972,
AMSOIL Synthetics have
proven to be the BEST.
AMSOIL also engineers and manufactures Ea Oil Filters
with Nanofiber Technology which have a 25,000 mile/1-year
service life as well as specialized filtration systems for
commercial and fleet applications in cars and light, medium and
heavy trucks which can filter particles down to less than one
micron (a standard full flow oil filter can only filter to 20-25
microns, and at a reduced efficiency) making oil changes
virtually unnecessary and virtually eliminating engine wear.
These filters have been proven by millions of miles of over-the
road trucks, construction equipment and fleet service.
-
AMSOIL saves you time and money.
-
The only 25,000 mile/one- year and
35,000/one- year motor oil in the world.
-
Exceeds the most stringent
performance specifications of all major U.S. and foreign
automotive and truck manufacturers.
-
Provides up to two-times the wear
protection of other motor oils.
-
Increases the life of your vehicle.
-
Improves performance, fuel economy
and efficiency.
-
Diesel oil and filtration products
designed to deliver 1,000,000 miles for over-the-road trucks
before engine overhaul.
-
Used by many national racing teams,
fleets, police departments, construction firms and trucking
companies.
To Sell AMSOIL in Your Store or
Purchase For Use in Your Businesses Equipment
Factory Direct Catalog Request
Form |
Superior Oils and Lubricants
ken@oilsandlube.com
Phone 918-269-0081
Toll Free 1-877-237-6323
8555 E. Wesson Ct., Claremore, OK. 74019
AMSOIL Synthetic Motor Oils
Home Page
Dodge Cummins Diesel
| Ford Powerstroke Diesel
|
AMSOIL vs. Mobil 1
Converting
to AMSOIL | Motorcycle Oils |
Diesel Fuel Additives
Gasoline
Additives | AGGRAND
| ALTRUM
Harley
Davidson
| Links |
Site Map
|