|
Free Factory Direct Catalog, Product, Technical and Wholesale Pricing Packet
Request Form
Purchase AMSOIL
Home
DEALERSHIP
INFORMATION
HOME BUSINESS OPPORTUNITIES
FAVORITE LINKS
Request Retail-on-the-Shelf or Commercial Account Information.
Product Application Guide
Amsoil Filter Guide
|
"We've saved thousands of dollars in
transmission repairs."
Dave Turpen
Two time USHRA World Champion
AMSOIL Synthetic Powershift Transmission Fluids are Recommended for
Applications Requiring the Following Specifications:
- Caterpillar TO-4
- Allison C-4
- HD Torque and Drivetrain
- Eaton Fuller CD-30 (SAE 30)
- Eaton Fuller CD-50 (SAE 50)
AMSOIL Synthetic Powershift Transmission Fluids are specifically
designed for heavy-duty powershift transmissions. Formulated for extended
drain intervals, AMSOIL Synthetic Powershift Transmission Fluids contain
top-quality synthetic basestocks and a high level of top-quality additives
selected specifically for powershift transmission performance. They offer
unmatched transmission friction performance, smooth brake operation,
reduced gear and bearing wear and increased equipment life. AMSOIL
Synthetic Powershift Transmission Fluids extend time between overhauls.
AMSOIL Synthetic SAE 50 Powershift Transmission Fluid exceeds Fuller
CD-50 performance specification and is ideal for use in Fuller, Rockwell,
Spicer, Fabco, Warner and other large truck manual transmissions.
Friction Characteristics
AMSOIL Synthetic Powershift Transmission Fluids are compatible with common
metallic and nonmetallic friction materials. AMSOIL Synthetic Powershift
Transmission Fluids' stable frictional characteristics eliminate the
problems of excessive brake noise and vibration, clutch slippage, friction
surface deposits and design material degradation.
AMSOIL Synthetic Powershift Transmission Fluids are formulated for
fast, smooth clutch engagements and wet brake operations; excellent power
transmission through clutches and synchronizers; and superior hydraulic
fluid performance for servo equipped units.
Wear Protection
AMSOIL Synthetic Powershift Transmission Fluids exceed the wear
requirements of the Caterpillar TO-4 specification. AMSOIL Synthetic
Powershift Transmission Fluids are formulated without viscosity index
improvers for superior shear stability. They maintain grade throughout
service life, due to their superior shear stability, providing long-term
protection against equipment wear, even when equipment is frequently
subjected to sustained periods of applied pressure or high horsepower and
high torque.
High and Low Temperature Performance
In high temperatures, AMSOIL Synthetic Powershift Transmission Fluids
dependably protect components from wear. Their superior oxidative and
thermal stability inhibits the formation of varnish, deposits and sludge
so equipment runs clean. AMSOIL Synthetic Powershift Transmission Fluids
are excellent heat transfer fluids and may help hot-running equipment
operate up to 50° F cooler and keep them running in their optimal
temperature range. In low temperatures, AMSOIL Synthetic Powershift
Transmission Fluids flow readily for dependable startup and post-startup
protection.
Copper Corrosion, Rust and Foam Inhibition
AMSOIL Synthetic Powershift Transmission Fluids protect equipment from
copper corrosion and rust, even during equipment storage. AMSOIL Synthetic
Powershift Trans- mission Fluids do not foam in service, protecting
equipment from the metal-to-metal contact and wear that occurs with use of
foam-filled fluids.
Installation
AMSOIL Synthetic Powershift Transmission Fluids are fully compatible with
other fluids used in powershift applications. To install AMSOIL Synthetic
Powershift Transmission Fluids, drain the fluid in the system,, replace
the filter (if so equipped) and install the appropriate AMSOIL Synthetic
Powershift Transmission Fluid.
Service Life
AMSOIL Synthetic Powershift Transmission Fluids provide two to five times
the service life of conventional petroleum fluids if AMSOIL Synthetic
Powershift Transmission Fluids are kept free of dirt and moisture.
AMSOIL Synthetic Powershift Transmission Fluids may be used for 250,000
miles or five years (whichever comes first) in manual transmissions.
AMSOIL Limited Warranty
Typical Technical Properties
|
AMSOIL SAE 10W, 30 and 50 Synthetic
Powershift Transmission Fluids (CTG, CTJ, CTL)
|
| Product Code |
CTG |
CTJ |
CTL |
| SAE Viscosity Grade |
10W |
30 |
50 |
| ISO Viscosity Grade |
32 |
68 |
150 |
| Kinematic Viscosity @ 100° C, cSt (ASTM
D-445) |
7.1 |
11.0 |
18.3 |
| Kinematic Viscosity @ 40° C, cSt (ASTM
D-445) |
40.5 |
76.2 |
159.0 |
| Viscosity Index (ASTM D-2270) |
138 |
133 |
128 |
| Flash Point °C (°F) (ASTM D-92) |
254 (486) |
259 (498) |
268 (514) |
| Fire Point °C (°F) (ASTM D-92) |
270 (518) |
272 (522) |
292 (558) |
| Pour Point °C (°F) (ASTM D-97) |
-51 (-60) |
-46(-51) |
-36 (-33) |
| Four Ball Wear Test 40 kg. 75°C, 1200
rpm, 1 hour (ASTM D-4172 B) |
0.35 |
0.35 |
0.35 |
| Noack 250°C, 1 hour, percent weight
loss (DIN 51581) |
5.3 |
3.6 |
3.5 |
Superior Oils and Lubricants
ken@oilsandlube.com
Phone 918-269-0081
Toll Free 1-877-237-6323
8555 E. Wesson Ct., Claremore, OK. 74019
AMSOIL Synthetic Motor Oils Home Page
Dodge Cummins Diesel |
Ford Powerstroke Diesel |
AMSOIL vs.
Mobil 1
Converting
to AMSOIL | Motorcycle Oils |
Diesel Fuel
Additives
Gasoline
Additives | AGGRAND
| ALTRUM
Harley
Davidson | Links |
Site Map
|