|
Free Factory Direct Catalog, Product, Technical and Wholesale Pricing Packet
Request Form
Purchase AMSOIL
Home
DEALERSHIP
INFORMATION
HOME BUSINESS OPPORTUNITIES
FAVORITE LINKS
Request Retail-on-the-Shelf or Commercial Account Information.
Product Application Guide
Amsoil Filter Guide
|
 Synthetic
Multi-Purpose Grease, NLGI #2 (GLC)
Package sizes include:
8-oz. Tube
8-oz. Tubes (case of 12)
14-oz. Cartridge
14-oz. Cartridges (case of 10)
14-oz. Cartridges (case of 40)
35-lb. Lug
120-lb. Keg
400-lb. Drum
PRODUCT DESCRIPTION
AMSOIL Synthetic
Multi-Purpose Grease grade #2 is recommended in manual or automatic
lubricating systems.
NLGI #2 (GLC) is the preferred choice
for medium to high ambient temperatures, sleeve type bushings, high
shock loading environments, wet environments and wheel bearings and
other automotive applications.
The correct consistency grade of AMSOIL
Synthetic Multi-Purpose Grease is recommended in heavy and light duty
applications found in manufacturing plants, automobiles, agricultural
and construction equipment.
These include, but are not limited to,
roller bearings, plain bearings, thrust bearings, gears, electric
motors, presses, winches, bushings, wheel bearings, chassis lubrication,
universal joints, ball joints, tie-rod ends, and steering knuckles.
AMSOIL Synthetic Multi-Purpose Greases are suitable for use up to 350
degrees F. When operating at elevated temperatures, frequent regreasing
may be required.
AMSOIL Synthetic Multi-Purpose Greases
are compatible with many other types of greases. However, it is
recommended that when changing greases, the equipment be cleaned of the
old grease when possible or flushed with a liberal amount of
Multi-Purpose Grease while the mechanism is in operation. Closely
monitor the system for any inconsistencies. Grease compatibility
questions should be referred to your AMSOIL representative or AMSOIL
Inc.
PERFORMANCE FEATURES
- High dropping point of 500°F+
- Resists thermal and oxidation degradation
- Excellent water-washout resistance
- Good low temperature pumpability and torque values
- Adhesive and shear stable to prevent squeeze out
Applications or Requirements
- GLC (#2) ASTM D-4950 (NLGI)
Service GC/LB
- GLC (#2) Cincinnati Milicron P-64
Spec
- GLC (#2) Mack MG-C
APPLICATION RECOMMENDATION
AMSOIL GLC Greases grade #2 is recommended for use in manual
or automatic lubricating systems. NLGI #2 (GLC) is the preferred choice
for medium to high ambient temperatures, sleeve type bushings, high
shock loading environments, wet environments. and is the primary choice
for wheel bearings.
The correct consistency grade of AMSOIL GL multi-purpose greases are
recommended for use in heavy and light duty applications found in
manufacturing plants, automotive applications, agricultural equipment
and construction equipment. These include, but are not limited to,
roller bearings, plain bearings, thrust bearings, gears, electric
motors, presses, winches, bushings, wheel bearings. chassis lubrication,
universal joints, ball joints, tie-rod ends, and steering knuckles.
AMSOIL GL greases are suitable for use up to 350 F When operating at
elevated temperatures, frequent regreasing may be required.
AMSOIL GL Lithium Complex Greases are compatible with many other
types of greases. However, it is recommended that when changing greases,
the equipment be cleaned of the old grease when possible or flushed with
a liberal amount of the GL grease while the mechanism is in operation.
Closely monitor the system for any inconsistencies. Grease compatibility
questions should be referred to your AMSOIL representative or AMSOIL
Inc.
APPLICATION MAINTENANCE
Maintaining a clean work environment is important when equipment
greasing is performed. Wipe grease fitting clean prior to injecting
grease to prevent contaminant ingestion. Maintain bearing housings
one-third to one-half full of grease. Do not over-grease, as excessive
heat buildup can result. Supplement standard grease maintenance by
periodically cleaning and packing housings with fresh grease on an
established maintenance schedule.
| Typical Technical
Properties |
| Synthetic GLC Grease |
GLC |
NLGI GC/LB |
| Thickener |
lithium complex |
NR |
| NLGI consistency grade |
2 |
NR |
| NLGI performance grade |
GC-LB |
NR |
| Penetration - ASTM D 217 (25°C [77°F], 0.1
mm) worked 60 strokes |
265-295 |
220-340 min |
| Dropping point, °F[°C] - ASTM D2265 |
550 [288] |
428 [220] min |
| High temperature life, hours - ASTM D 3527 |
160 |
80 min |
| Oxidation stability, psi - ASTM D 942 (100
hr/300 hr) |
0/3 |
NR |
| Water washout, percent - ASTM D 1264 |
1.8 |
15 max |
| Rust and corrosion - ASTM D 1743 |
pass |
pass |
| Oil separation, percent loss - ASTM D 1742
(24 hours, 25°C [77°F] |
1.1 |
6.0 max |
| Leakage, g lost - ASTM D 4290 |
1.0 |
10 max |
| Four ball wear test, mm scar - ASTM D 2266 |
0.40 |
0.60 max |
| Fretting wear, mg - ASTM D 4170 |
3.4 |
10 max |
| Four ball EP, kgf - ASTM D 2596
Weld point
Load wear index |
400
50 |
200 min
30 min |
| Timken OK load test, lbs - ASTM D 2509 |
50 |
NR |
| Low temperature torque, N*m - ASTM D 4693
(-40°C [-40°F]) |
1.3 |
15.5 max |
| LT-37 pumpability, g/min (60°F/0°F
[16°C/-18°C]) |
360/7 |
NR |
| Copper corrosion - ASTM D 4048 |
1B |
NR |
| Disc brake wheel bearing specifications
Ford ESA-M1C 198A
Chrysler MS-3701 |
yes
yes |
NR
NR |
| Oil viscosity:
40°C [104°F], cSt
100°C [212°F], cSt |
151
19.2 |
NR
NR |
| Flash point, °F[°C] - ASTM 92 |
450[232] |
NR |
| Color |
red |
NR |
| Texture |
smooth with tack |
NR |
NA: Not applicable
NR: Not required for NLGI GC-LB labeling |
|
AMSOIL
is the undisputed leader in synthetics.............
Since 1972,
AMSOIL Synthetics have
proven to be the BEST.
AMSOIL also engineers and manufactures Ea Oil Filters
with Nanofiber Technology which have a 25,000 mile/1-year
service life as well as specialized filtration systems for
commercial and fleet applications in cars and light, medium and
heavy trucks which can filter particles down to less than one
micron (a standard full flow oil filter can only filter to 20-25
microns, and at a reduced efficiency) making oil changes
virtually unnecessary and virtually eliminating engine wear.
These filters have been proven by millions of miles of over-the
road trucks, construction equipment and fleet service.
-
AMSOIL saves you time and money.
-
The only 25,000 mile/one- year and
35,000/one- year motor oil in the world.
-
Exceeds the most stringent
performance specifications of all major U.S. and foreign
automotive and truck manufacturers.
-
Provides up to two-times the wear
protection of other motor oils.
-
Increases the life of your vehicle.
-
Improves performance, fuel economy
and efficiency.
-
Diesel oil and filtration products
designed to deliver 1,000,000 miles for over-the-road trucks
before engine overhaul.
-
Used by many national racing teams,
fleets, police departments, construction firms and trucking
companies.
To Sell AMSOIL in Your Store or
Purchase For Use in Your Businesses Equipment
Factory Direct Catalog Request
Form |
Superior Oils and Lubricants
ken@oilsandlube.com
Phone 918-269-0081
Toll Free 1-877-237-6323
8555 E. Wesson Ct., Claremore, OK. 74019
AMSOIL Synthetic Motor Oils
Home Page
Dodge Cummins Diesel
| Ford Powerstroke Diesel
|
AMSOIL vs. Mobil 1
Converting
to AMSOIL | Motorcycle Oils |
Diesel Fuel Additives
Gasoline
Additives | AGGRAND
| ALTRUM
Harley
Davidson
| Links |
Site Map
|